Chapter 4 ShoreGear Switches
4 ?
24
ShoreTel, Inc.
Connecting to a ShoreGear-40/8, ShoreGear-60/12, ShoreGear-120/24,
and ShoreGear-T1/E1
The ShoreGear-40/8, ShoreGear-60/12, ShoreGear-120/24, and ShoreGear-T1/E1
provide a serial communications port accessible through a straight-through 9-pin serial
cable.
NOTE
You cannot access ShoreGear CLI on ShoreGear-40/8, ShoreGear-60/12,
ShoreGear-120/24, and ShoreGear-T1/E1 switches using Telnet.
dumpUsedBw
Displays information about actual
bandwidth used on individual calls/
legs.
uaCallList
Displays information about active
calls and legs.
dial_num_dump
Displays information about switch's
off-system extension configuration.
dn_plan_status
Displays information about the
switch's dial plan.
dnp_debug_level
Displays detail information (digit by
digit) about dial plan access.
Recommend using level 1.
bigNvRamSetup
Erases switch's configuration in
NvRam.
reboot
Reboots the switch.
diagdCommands
Outputs full switch diagnostic
information.
mpm_debug_mask=0x40 Sets mpm debug flag to output
Caller ID information received on
inbound calls.
mpm_debug_mask=-1 Displays detailed mpm information.
Full debug of inbound calls
(CallerID, DTMF).
mpm_debug_mask=0x10 Displays detailed DTMF
information.
DumpSB
Displays maximum PMCSW
outputs.
DumpSRAM
Displays Motorola 860 processor
information.
For IPBX model switches only.
Record2File(port,time,<file_n
ame>;0)
Records inbound media on the
specified port for the specified time
(in seconds) and writers it to
/inetpub/ftproot.
Writes to the TMS server controlling
the switch. FTP write access must be
enabled on the server.
etherMonStart <bytes>
Bypes is the number of bytes of
information you want to capture (for
example, 10000000). Captures
ethernet packets for trace purposes
This command consumes memory
on the switch. Use
memShow
to
determine available memory and
never specify more than is available.
etherMonDump
Writes the ethernet trace
information captured when using
EtherMonStart. Writes to a .cap file
in \inetpub\ftproot directory of the
ShoreWare server controlling the
switch. The .cap file name is ST-<lst
3 bytes of MAC-time-date>.cap.
etherMonStop
Stops capturing ethernet packets.
