Chapter 4 ShoreGear Switches
Maintenance Guide
4 ?
9
Table 4-1
Parameter Settings for Flash Boot and FTP Boot
Parameter
Description
Flash Boot
FTP Boot
12, Teleworker,
24, T1/E1
12, Teleworker
24
T1/E1
boot device The boot device; either a
network interface or a
flash location
flash = 0
dc
fei
fei
processor
number
Always 0
0
0
0
0
host name Always bootHost
bootHost
bootHost
bootHost
bootHost
file name
(IPBX)
(See Note
above)
Path to the VxWorks.sys
file for IPBX model
switches
/flash0/vxworks /ts12/vxworks /ts24/vxworks /tst1/vxworks
file name (SG)
(See Note
above)
Path to the VxWorks.sys
file for SG model
switches
/flash0/vxworks /tsa/vxworks
/tsa/vxworks
/tsa/vxworks
inet on
ethernet
<IP address>:<Subnet
Mask> (Subnet mask in
hex)
a
10.10.0.59:ffff0000 10.10.0.92:ffff0000 10.10.0.59:ffff0000 10.10.0.102:ffff0000
inet on
backplane
Not used
host inet IP address of the main
ShoreWare server
a
10.10.0.5
10.10.0.5*
10.10.0.5
10.10.0.5
gateway inet IP address of router
a
10.10.0.254
10.10.0.254
10.10.0.254
10.10.0.254
user
User name for logging
into FTP site (should
always be set to
anonymous)
anonymous
anonymous
anonymous
anonymous
ftp password
(pw) (blank =
use rsh)
Password required for
access to FTP site
(should always be st1)
st1
st1
st1
st1
flags
SeeBoot Flags
0x40
0x40
0x40
0x40
target name Host name of switch that
can be set to other values
ShorelineSwitch ST-000127
ShorelineSwitch ShorelineSwitch
startup script
(IPBX)
Path to the bootscrp.txt
file for IPBX model
switches
/flash0/bootflsh.txt /ts12/bootscrp.txt /ts24/bootscrp.txt /tst1/bootscrp.txt
startup script
(SG)
Path to the bootscrp.txt
file for SG-24, SG-8, and
SG-T1 model switches
/flash0/bootflsh.txt /tsa/bootscrp.txt /tsa/bootscrp.txt /tsa/bootscrp.txt
other
Set to the network
interface
fei
dc
fei
fei
a. The IP addresses are examples. These must contain the correct IP addresses for your system.
